Category Archives: Laser Engraving

Experts Advice On Maintaining Cylinder Engraving Machine

Experts Advice On Maintaining Cylinder Engraving Machine

Maintaining your cylinder engraving machine is not one step thing, as most people think. There are several things that you need to do to make sure your machine is in good shape. If you have just invested in a cylinder engraving machine, this guide is for you.

We have put together some of the crucial things that you need to consider to do to keep your machine in good shape. These are the maintenance tips that have been by experts to work. Check out the following:

Start With A Good Machine

The first thing one must get right is the kind of machine they invest in. If you invest in a bad quality machine, it will be very difficult to maintain no matter how good you try. Start with investing in a quality cylinder engraving machine. Make sure that it is made from high-quality materials. You also need to check the quality of the technology used for machine construction.

Proper Use

The second thing is the proper use of the machine. You may be maintaining the machine as recommended, but you will still have problems if it is not being used properly. If you are operating the machine, get better training on how to operate. If you have employed an operator, they must be well trained and with a wealth of experience.

Lubricate Properly

One of the most effective ways to maintain a cylinder engraving machine is by lubricating it properly. Make sure that all the moving parts and the areas that could be affected by friction are properly lubricated. The user manual that comes with the cylinder engraving machine has areas that needed to be lubricated highlighted. The frequency of lubrication is also provided by the manufacturer.

Tighten Loose Nuts

The other thing that you need to consider is the tightening of the loose nuts and bolts. This is a very common problem that, in some cases, it can cause a high rate of wear and tear. Because of the vibrations produces when engraving cylinders, some of the bolts and nuts can become loose. You need to consider checking for cylinder engraving machine loose nuts and nuts regularly.

Overhaul maintenance

The list tip is overhaul maintenance of the cylinder engraving machine. The manufacturer usually provides guidelines on how to about this. Make sure that you have a schedule for overhaul maintenance of the machine to ensure every part is checked and kept in the best condition possible.


5 Mistakes To Avoid In Laser Engraving

5 Mistakes To Avoid In Laser Engraving

Laser engraving technology is, without a doubt, one of the most advanced technologies in printing. Unlike most of the other printing options, this form of printing is best in its versatility in application. You will be impressed by the fact that laser engraving can work on almost all kinds of surfaces. However, this is if you buy from a reputable brand such as Laser Engraving Manufacturers.

But to get the most out of laser engraving, there are several common mistakes that you need to avoid. These are mistakes that will make it almost impossible to produce a great engraving printing work. Here is what you need to look out for:

Burning Substrate

The burning of the substrate material is one of the common mistakes that people make. You need to avoid mistakes because it can lead to a lot of damages and probably lose your credibility is a businessperson. So you need to know the right setting, each of the fabrics being engraved to avoid this problem. It is also important to know what fabrics the machine can engrave and which ones it can’t. So, don’t use the machine on a fabric its not designed for.

Inconsistent Glass Engraving

One of the biggest benefits of laser engraving is that it can print images on substrates such as glass, which were very difficult to work on. But there can be some inconsistencies when it comes to working on this substrate. In some cases, the laser beam fractures the glass when it strikes it. The problem is usually causing a high-resolution setting that produces more energy than the substrate can handle.

Acrylic Not Producing Frosty White Engraving

It is expected that when engraved, the acrylic substrate will produce a frosty white engraving that makes it look nice. But that may not be the case all the time. In some cases, this may not happen. But the problem is usually the type of acrylic material used. For the frosty white engraving to appear, you need cast acrylic and not the low quality extruded acrylic.

Slow Laser Engraving

This a common problem, especially with relatively old laser engraving machines. If your machine starts slowing down, checking the setting first. If there are areas that you need to reset, just do it. If that’s not the case, have the machine services to improve its performance. Maybe you need a new laser gun to enhance the machine’s performance.